Volkswagen | PRCS-Volkswagen

PRCS Volkswagen, Complete Set with 21 Y-cables, Plastic Breakout Box with rubber bumper, 3 meter extension cable.
This set consists of the most common connectors, for Volkswagen. 

Note, the suitcase only contains Y-cables, and no separate connectors. 

The Y-cable, also known as a splitter cable, is positioned between the sensor/actuator and the cable tree connector, allowing the sensor to function normally within a working motor management system. By connecting an 18-pin breakout box to this cable, it becomes possible to safely and reliably measure signals to and from the sensor using a multimeter or oscilloscope.

The pin configuration on the connector corresponds to the numbering on the breakout box, ensuring straightforward signal identification. This setup eliminates the need to puncture cables for signal measurement. Consequently, traditional methods such as using a paperclip to measure along the seals are no longer necessary.

This approach avoids creating holes in the wire insulation or seals, preventing oxidation of the copper wire and reducing future issues. It also eliminates risks associated with measuring through separate connectors, which could damage contacts. Furthermore, the sensor remains connected and operational during measurements, ensuring accurate readings in real-time conditions

Click here for a complete overview with photos.

PRT-CASE 1
PRTK-BOB18
Prext-3
Pry3-0040
Pry2-0048
Pry8-0006
Pry2-0049
Pry3-0041
Pry4-0030
Pry4-0031
Pry4-0032
Pry6-0022
Pry4-0033
Pry5-0004
Pry2-0050
Pry8-0007
Pry5-0005
Pry14-0003
Pry3-0042
Pry2-0032
Pry2-0021
Pry3-0021
Pry3-0023
Pry3-0024