Yanmar Stage IIIA & IIIB | PRCS-YAN-001

Yanmar Stage IIIa & amp; IIIB, Komplete set with 16 Y-cables, plus 18 Pin Kunstof Breakout Box. Motors 4TNV98, 4TNV94T; 4TNV98C
The Y-cable or splitter cable is placed between the sensor/actuator and cable tree connector so that the sensor can normally function in a working motor management system. By connecting the 18 pin breakout box to this cable, a measurement of the signals to and from the sensor can be taken in a safe and reliable way. This can be done by using a multimeter or scoop. The pin occupation with the pin numbers on the connector is the same as the number of songs on the Breakout Box. In this way, cables no longer have to be punctured to measure a signal. The use of a paper clip and measuring along the seals is therefore a thing of the past. There is no hole in the insulation of the wire, or the seal and the copper of the wire, cannot oxidize and cause the necessary problems in the future. Nor will it be measured in a separate connector with the chance of damage to the contact. Moreover, the sensor also no longer works with a separate connector!

Items
Partnumber
Description

1
Pry6-0033
DPF Differential

2
Pry2-0059
DPF inlet temp. Sensor

3
Pry2-0023
DPF Inside Temp. Sensor

4
Pry6-0025
EGR PRESSURE SENSOR

5
Pry2-0033
Ambient temp. Sensor

6
Pry2-0061
Coolant temp sensor

7
Pry4-0019
EGR VALVE

8
Pry6-0018
Throttle Intake

9
Pry2-0021
Fuel Injector

Pry2-0021
Supply pump

Pry2-0021
Fuel Temp. Sensor

10
Pry3-0024
Rail Pressure

Pry2-0021
Cranck speed sensor

11
Pry3-0021
Cam speed sensor

12
Pry2-0028
EGR Temp in

13
Pry2-0060
Intake manifold temp. Sensor

14
Pry2-0025
Exhaust gas temp sensor

15
Pry6-0017
Tier 3 EGR

16
Pry6-0026
Tier 3 Rack Actuator

17
PRT-CASE-3
Storage Case with Inlay

18
PRTK-BOB18
18 Pin Breakout Box