John Deere Set 2 Advanced for 6R Series | PRCS-JD-2

John Deere Set 2 Advanced for 6R Series, Komplete Set with 28 Y-cables, Plus 18 Pin Play Breakout Box, PRTK-BOB18
The Y-cable or splitter cable is placed between the sensor/actuator and cable tree connector so that the sensor can normally function in a working motor management system. By connecting the 18 pin breakout box to this cable, a measurement of the signals to and from the sensor can be taken in a safe and reliable way. This can be done by using a multimeter or scoop. The pin occupation with the pin numbers on the connector is the same as the number of songs on the Breakout Box. In this way, cables no longer have to be punctured to measure a signal. The use of paper clip and measuring along the seals is therefore a thing of the past. Thus there is no hole in the insulation of the wire, or the seal and the copper of the wire, cannot oxidize and cause the necessary problems in the future. Nor will there be measured in a separate connector with the chance of damage to the contact. Moreover, the sensor also no longer works with a separate connector!
For a complete overview click here.

PRT-CASE1
PRTK-BOB18
Prext-3
Pry2-0012
Pry2-0021
Pry2-0022
Pry2-0028
Pry2-0029
Pry2-0037
Pry2-0038
Pry2-0060
Pry2-0071
Pry3-0004
Pry3-0007
Pry3-0031
Pry3-0033
Pry3-0045
Pry3-0050
Pry3-0051
Pry4-0003
Pry4-0017
Pry4-0023
Pry4-0034
Pry6-0005
Pry6-0009
Pry6-0011
Pry6-0029
Pry6-0041
Pry10-0008
Pry12-0005
Pry16-0002