232-channel failure simulation box | FSB232M
The FSB232M is a serial 232-channel failure simulation box. The FSB232M is equally More Universal Than The Smaller Model, The FSB155M. This box has bone designed in order to be able to simulate faults in Automotive Electronic Motor Management Systems for Petrol or Diesel Engines. With this system, signals of a running engine can be measured or disconnected from the engine computer. Each Channel is modified with an integrated fuse for safety. The Box is placed in Serial Connection with the System, So Each Signal Must Pass Through The Failure Simulation Box. Three Integrated Red LEDs Can Be Connected to All Signals Like Fuel Injectors, Relays, Ignition etc. 10 Turn potentiometers or 10k, 50k, and 100kohm have leg integrated to simulate: The Resistance and the Bad Connection of Wires or Terminals of Engine Electronics. An Adapter Cable is needed to connect the box to the engine.
The Big Advantage of this Tool is that you can now use one adapter cable for every vehicle that uses the same type or layout of connector!
Specifications:
Each Channel (232) is fitted with a 5 amp fuse
Each Channel has a switch to simulate faults or to disconnect the engine ecu pins,
Signals can be measured from the engine ecu or the wiring harness of the system
3 Red LEDs are included in The Front Plate
3 x 10 turn potentiometers are included with 10k-50k-$ 50kohm for simulating the resistance
No Power Supply From Outside Is Necessary
An English Manual is Included
Dimension are 65x51x24.5 cm
Weight 23 kg
FSB232M is integrated in a black portable case
The Anodized Front Plate for Electric Isolation
Optional Equipment:
Optional cover to hide the switches.
Multimeter fluke
Banaplug Wire
Jumper Connector to Shortcut The Adapter Cable When FSB232M is Removed. Partnumber FSB-JC
Your Advantages:
Motor Management System Can Be "Entered" Without Damag Ecu Connector or Wires
Universal System: Applicable On All Cars of Any Make And On Any Motor Management System
Possibility to simulate failures for e.g. Training Purposes Without Damaging Systems
Also applicable on cars
Safety:
This training Model Complies with the European Safety Standard CE.
