PRCS-Toyota-1 Cable Set | PRCS-TOYOTA-1

Toyota-1, Komplete set with 18 Y-cables, plus 18 Pin Kunstof Breakout Box.
The Y-cable or splitter cable is placed between the sensor/actuator and cable tree connector so that the sensor can normally function in a working management system. By connecting the 18 pin breakout box to this cable, a measurement of the signals to and from the sensor can be taken in a safe and reliable way. This can be done by using a multimeter or scoop. The pin occupation with the pin numbers on the connector is the same as the number of songs on the Breakout Box. In this way, cables no longer have to be punctured to measure a signal. The use of a paper clip and measuring along the seals is therefore a thing of the past. There is no hole in the insulation of the wire, or the seal and the copper of the wire, cannot oxidize and cause the necessary problems in the future. Nor will it be measured in a separate connector with the chance of damage to the contact. Moreover, the sensor also no longer works with a separate connector!

Part number
Application

Bosch system used on 1.6 and 2.0 Diesel engines for: Verso 1.6 (2014-), Auris 1.6 (2015-) & amp; Avensis 1.6 and 2.0 (2015-)

Pry2-0032
Injector Diesel - Dynamo Lin

Pry6-0011
Basket house

Turbo Schoeprad adjustment

Pry2-0045
Temperature sensor after intercooler/engine temperature/fuel temperature

Pry3-0046
Folder sensor, crankshaft sensor, camshaft sensor

Pry3-0013
EGR VALVE

Pry2-0054
Air conditioning compressor for diesel and gasoline engine

Pry3-0023
Common Rail Print

Prius 3 ZR Motor:

Pry4-0037
Coaler

Pry3-0047
Camshaft sensor 2x

EGR 6 PIN

Pry2-0036
Camshaft adjustment 2x

Pry2-0056
Injector petrol

Pry3-0035
Airco Druk Sensor, Trinery

Pry2-0061
Engine temperature sensor

Pry6-0018
Hiss

Lambda sensor for cat

Pry4-0039
Lambda sensor after cat

Pry5-0010
Air mass meter

Gearbox/automatic prius:

8 PIN

Pry2-0002
2 pin

Pry3-0047
3 PIN

Pry6-0034
6 PIN

Storage case with professional layout
18 Pin Kunstof Breakout Box