Isuzu 4JJ1 Stage 3B-Tier 4 interim | PRCS-ISUZU-001

Isuzu 4JJ1 Stage 3B-Tier 4 Interim, Komplete Set with 16 Y-cables, plus 18 Pin Kunstof Breakout Box.
The Y-cable or splitter cable is placed between the sensor/actuator and cable tree connector so that the sensor can normally function in a working motor management system. By connecting the 18 pin breakout box to this cable, a measurement of the signals to and from the sensor can be taken in a safe and reliable way. This can be done by using a multimeter or scoop. The pin occupation with the pin numbers on the connector is the same as the number of songs on the Breakout Box. In this way, cables no longer have to be punctured to measure a signal. The use of paper clip and measuring along the seals is therefore a thing of the past. Thus there is no hole in the insulation of the wire, or the seal and the copper of the wire, cannot oxidize and cause the necessary problems in the future. Nor will there be measured in a separate connector with the chance of damage to the contact. Moreover, the sensor also no longer works with a separate connector!
Items
Partnumber
Description

1
Pry5-0010
Air Mass meter

2
Pry6-0025
Inlet Valve

3
Pry3-0031
Folder sensor

4
Pry2-
Inlet temperature

5
Pry2-0004
Mprop and fuel injector

6
Pry2-
Turbo Wastgate Activator

7
Pry10-
EGR VALVE

8
Pry2-0060

9
Pry3-
Oil Pressure or Level sensor

10
Pry1-
Air conditioning pump clutch

11
Pry3-0035
DPF Differential

12
Pry3-0033
Fuel Filter Sensor

13
Pry2-
Low Pressure Fuel Pomp

14
Pry2-
Generator

15
Pry2-
DPF inlet temp. Sensor

16
Pry2-
DPF Inside Temp. Sensor
+D615

PRT-CASE3
Storage case with 18 courses

PRTK-BOB18
18 Pin Plastic Breakout Box